Networks for homes and small offices: from planning to a shopping list

A network project does not have to begin by replacing every device. This overview takes you from assessing existing equipment through selecting individual components to checking the finished connection. Some linked guides contain labelled affiliate links; recommendations should follow actual needs.

Plan a new network or extend one

Start with planning a home network. It shows how to count devices, choose a cable route and build a parts list. The four-device example can be adapted; it is neither a ready-made shopping basket nor an instruction to replace working hardware.

An existing router port may be enough for one workstation. An extra switch becomes useful when ports run out or a sensible distribution point is needed. Adding wired LAN does not automatically replace the Wi-Fi coverage mobile devices need.

Choose connections and power

The switch selection guide helps with port count, uplink, link rate and PoE budget. It distinguishes simple port expansion from managed networks. Record each device’s requirements before buying instead of filtering solely for maximum speed.

For ready-made cables, the patch cable buying checklist covers connectors, length, construction and location of use.

Organize devices and cables

The guide to planning a small network cabinet covers mounting dimensions, load, fixings, airflow and labelling. A parts-list example for twelve terminated data cables explains the difference between a passive patch panel and an active switch.

Narrow down faults first

A connection fault is not an automatic reason to buy. Check whether one device, a cable route or the whole network is affected. Comparing with a known working connection can help. Depending on the findings, use checking LAN speed, Wi-Fi connected but no internet or distinguishing DNS and connection errors. These describe Windows 11 diagnostics and the limits of each measurement.

A useful shopping list includes

  • Device or component, quantity and specific location.
  • Required connections, speed and, where relevant, power supply.
  • Suitable dimensions, mounting and accessories.
  • Parts already available, to avoid duplicate orders.
  • Manufacturer datasheet, total price including shipping and delivery region.
  • Planned functional checks and documentation after installation.

This series is an editorial planning and buying aid, not a laboratory comparison. Specific product evaluations are described as tests only when the tests have actually been performed.

Add wired LAN where it helps Wi-Fi

Start with one stationary workstation. Record the existing setup, proposed cable route and a way back. Keep Wi-Fi available for mobile devices; an Ethernet cable does not automatically fix DNS, ISP or application problems.

  • Check existing router ports and cables before planning a switch. Route the cable without creating a trip hazard.
  • Compare Wi-Fi and LAN on the same computer against the same destination. Temporarily disconnect the other connection for an unambiguous comparison, then restore it.
  • Record negotiated link rate and a local file copy separately from an internet test. The slowest device, storage and other transfers affect the result.
  • If results are unusual, change only one known-good cable or port first. Record before and after; do not alter several components at once.

Understand network faults and test instruments

A continuity check examines wiring; qualification and standards-based certification are different test tasks.

Identify the question first: is the link absent, intermittent, or is just one service slow? An internet speed test does not measure only your building cabling. Use a tester only on the cable types and operating conditions specified by its manufacturer, particularly regarding live ports and PoE. Record the result, cable identifier and test setup. Buying equipment makes sense only when existing comparison checks cannot answer the question.

Fluke Networks

Office examples: five or ten workstations

  • Five workstations: 5 PCs + 1 printer + 1 access point + 1 router connection = 8 occupied switch ports. An eight-port switch would have no spare port in this example; 16 ports leave room.
  • Ten workstations: 10 PCs + 1 printer + 2 access points + 1 NAS + 1 router connection = 15 occupied switch ports. A 24-port unit leaves room here.

These examples assume all listed connections use the same switch. Existing router ports, separate uplink ports and additional devices may change the count. Two access points are an assumption, not a coverage guarantee. Check PoE per port and in total against actual device specifications. Choose the uplink and NAS connection for simultaneous traffic, not simply employee count.

Acceptance and handover

  • Check and label every intended connection using a known working device.
  • Keep a simple plan of router, switch ports, cable routes and access points.
  • Test the local link, internet access and required services separately; record date and setup with the results.
  • Make changes one at a time and retain a way to restore the previous setup.
  • Remove unnecessary items from the shopping list only after checking; retain existing information and documentation.

Addition and source review: 17 November 2026. Our own planning examples, not product tests or an on-site installation test.