Network routing with a Zyxel Router:
Routing exercises:
- Determination of group networks
- Group 5
- Network address 10.10.30.128
- Determination of WAN Interface
- 192.168.100.185
- Zywall Router:
- Standard Configruation:
- ftp://192.168.170.5/win/zywall10
- Unpacking Zip File
- Bin = firmware
- Rome = Configuration File
- Hyperterminal:
- Com interface selective
- 9600
- 8
- 1
- None
- Serial debug mode only
- See User Guide commands
- Enter atlc
- Transfer: Send file: protocol XModem
- Select Rome File.
- Receiving factory settings
- atgo restart of the router
- Standard Password: 1234
- Menu
- Configure LAN interface.
- WAN Interface = Internet Access Setup
- No Gateway due to Default Route
- System maintenance
- CLI (Command Line Interface)
- IP route status.
- Routing entry
- Menu Edit IP Static rout
- Enter IP addresses and route name.
- Menu 21
- Turn off firewall configuration.
- With Tracert you can then test the route exactly.
- Point 24
- Log and Trace
- Activate Syslog
- Install Syslogserver on PC